The 7 Series E32 Forum

EML-light comes up and car will not start - raoul750i 2010-06-04 17:31:59 (63 views)
- With ingition key on press accelerator pedal - alv12 2010-06-04 18:06:01 (62 views)
  - check list 750 engine (url) - shogun 2010-06-04 18:28:41 (73 views)
  - Re: With ingition key on press accelerator pedal - raoul750i 2010-06-04 18:26:53 (56 views)
    - after 2 years without running I would clean the DK (url) - shogun 2010-06-04 18:35:19 (58 views)
      - Re: after 2 years without running I would clean the DK - raoul750i 2010-06-08 20:35:07 (44 views)
        
        yes, CPS +cylinder ID sensors are also to be checked (nt) - shogun 2010-06-08 23:55:21 (46 views)
        
        Re: yes, CPS +cylinder ID sensors are also to be checked - raoul750i 2010-06-09 19:38:51 (50 views)
        
        Re: yes, CPS +cylinder ID sensors are also to be checked - froos 2010-06-10 05:39:34 (40 views)
        
        Re: yes, CPS +cylinder ID sensors are also to be checked - raoul750i 2010-06-23 07:03:43 (20 views)
        see here in the link (url) - shogun 2010-06-10 06:51:09 (42 views)
        
        Re: see here in the link - froos 2010-06-10 09:34:36 (42 views)
        
        Re: see here in the link - raoul750i 2010-06-23 07:07:03 (28 views)
        
        Re: see here in the link - froos 2010-06-24 05:49:24 (15 views)

I have a creaky/rubber rubbing sound from the front..... - whiteghost 2010-06-05 13:02:44 (81 views)
- Re: I have a creaky/rubber rubbing sound from the front..... - ndz 2010-06-09 10:40:15 (52 views)
  - Yes, when it was hot it definitely was louder - whiteghost 2010-06-15 00:36:20 (36 views)
- Any suggestions from anyone? (nt) - whiteghost 2010-06-07 21:13:43 (48 views)
  - Re: Any suggestions from anyone? - htrdbmr 2010-06-08 07:45:38 (49 views)
    - My thoughts echo yours.... - whiteghost 2010-06-08 16:57:14 (54 views)
      - Looks like the black moly lubricating compound - whiteghost 2010-06-12 13:57:05 (51 views)
        
        Re: Looks like the black moly lubricating compound - htrdbmr 2010-06-14 16:07:24 (38 views)
        
        I thought about that - whiteghost 2010-06-15 00:08:16 (35 views)

Favor needed- - stevebu 2010-05-24 09:47:46 (71 views)
- here is the drawing (url) - shogun 2010-05-24 16:17:44 (69 views)
  - That doesn't help much (but thanks) - stevebu 2010-05-25 10:06:17 (43 views)
    - Re: lines - joecer 2010-05-25 18:08:26 (63 views)
      - eaxtly as Joe says, no possibility to mix up - shogun 2010-05-25 19:04:15 (47 views)
        
        They are not whole pipes- - stevebu 2010-05-26 07:26:07 (50 views)
        
        In the end it does not really matter a whole heap - rv8flyboy 2010-05-27 10:29:52 (33 views)
        understood, here are many pics (url) - shogun 2010-05-26 17:03:45 (63 views)
        
        oil flow - joecer 2010-05-27 12:28:42 (45 views)
        
        I think I found a decent pic on realoem - stevebu 2010-05-29 12:15:28 (42 views)
        
        I need glasses- - stevebu 2010-06-03 14:20:11 (35 views)
        
        that is a known problem, Steve (url) - shogun 2010-06-03 19:36:27 (34 views)
        
        In my case I think I created it- - stevebu 2010-06-03 21:12:24 (33 views)
        
        give it a try with epoxy or other glue - shogun 2010-06-03 22:10:42 (33 views)
        
        The pins weren't leaking - - stevebu 2010-06-12 15:13:13 (11 views)

Had the 750i checked at the dealer $$$$$$$$$$ - froos 2010-06-01 15:09:15 (99 views)
- Re: Had the 750i checked at the dealer $$$$$$$$$$ - froos 2010-06-01 16:17:27 (55 views)
  - 4HP24 is installed in your car (url) - shogun 2010-06-01 19:44:15 (74 views)
  - Re: transmission number - joecer 2010-06-01 16:58:19 (44 views)
    - Re: transmission number - froos 2010-06-01 17:33:18 (58 views)
      - Re: transmission number - joecer 2010-06-02 06:18:55 (42 views)
      - All E32 735 and 750 automatics were four speed transmissions. - bcweir750 2010-06-01 18:31:28 (52 views)
        
        Re: All E32 735 and 750 automatics were four speed transmissions. - froos 2010-06-02 16:01:23 (50 views)
        
        by oil, did you mean ATF (automatic transmission fluid?) - bcweir750 2010-06-02 16:26:18 (57 views)
        
        Amended ATF check instructions from the owner's manual - bcweir750 2010-06-02 16:37:26 (59 views)
        
        Re: Amended ATF check instructions from the owner's manual - froos 2010-06-04 07:31:57 (38 views)
        Re: Amended ATF check instructions from the owner's manual - froos 2010-06-02 17:42:30 (44 views)
        
        Re: Amended ATF check instructions from the owner's manual - froos 2010-06-02 18:24:00 (40 views)
        How does the ATF look? it should look red, not black or brown. - bcweir750 2010-06-02 17:56:03 (49 views)
        
        Re: How does the ATF look? it should look red, not black or brown. - froos 2010-06-02 18:25:54 (47 views)
        
        The Bentley manual still has some advantages. - bcweir750 2010-06-02 19:19:37 (60 views)
        
        Re: The Bentley manual still has some advantages. - froos 2010-06-03 11:17:01 (53 views)
        
        Re: The Bentley manual still has some advantages. (pic) - froos 2010-06-06 17:57:26 (59 views)
        
        Re: The Bentley manual still has some advantages. - hobbymekk 2010-06-11 05:27:56 (33 views)
        
        Re: The Bentley manual still has some advantages. - froos 2010-06-11 06:10:42 (37 views)
        
        injector cleaning - look here (vid) (url) - shogun 2010-06-11 08:11:35 (66 views)

Shopping for shocks/springs what setup do you have? (pic) - vancouverbimmer 2010-06-01 19:54:37 (156 views)
- Vancoverbimmer, see this link. (url) - daryl12 91 735iL 2010-06-06 14:48:01 (56 views)
  - Yeah that's a good link, posted it in the original post - vancouverbimmer 2010-06-08 15:14:22 (35 views)
    - Re: Yeah that's a good link, posted it in the original post - daryl12 91 735iL 2010-06-09 14:43:19 (36 views)
- Re: Shopping for shocks/springs what setup do you have? - Hitmanx 2010-06-06 14:30:43 (54 views)
  - good info, thank you (nt) - vancouverbimmer 2010-06-08 15:23:36 (35 views)
- Re: Shopping for shocks/springs what setup do you have? - Claudio 2010-06-05 23:57:10 (48 views)
  - Here is the contact link... (url) - Claudio 2010-06-06 00:03:58 (37 views)
- Don't go Bilstein HD - too stiff IMHO. (nt) - beachman 2010-06-04 21:05:49 (69 views)
  - Re: Don't go Bilstein HD - too stiff IMHO. Ditto me too!! (url) - bob91750 2010-06-05 21:41:16 (44 views)
    - Already ordered them, last week so I guess I'm - vancouverbimmer 2010-06-08 15:27:05 (43 views)
- Re: Shopping for shocks/springs what setup do you have? - daryl12 91 735iL 2010-06-02 01:23:18 (92 views)
  - thank you, so a 7 is doable with the Bilstein SP, nice (nt) - vancouverbimmer 2010-06-02 13:40:58 (53 views)
  - Gonna change my ride number to 7 - daryl12 91 735iL 2010-06-02 06:19:04 (56 views)
    - I was wondering if your scale was to 5 or to 10 (nt) - cvillebimmer 2010-06-02 14:16:48 (44 views)
- I have bavauto springs and kyb gr2 shocks front and rear. - az735i 2010-06-02 00:48:48 (69 views)
  - I like that stance (nt) - vancouverbimmer 2010-06-02 13:35:54 (38 views)
- Don't confuse looks with riding comfort. - bcweir750 2010-06-01 21:33:55 (87 views)
  - Good points, I feel that after 10 years of ownership - vancouverbimmer 2010-06-02 13:39:36 (59 views)
    - Re: Good points, I feel that after 10 years of ownership - daryl12 91 735iL 2010-06-06 00:43:59 (40 views)
  - before I bought the M3 I was a fan of standard suspension - shogun 2010-06-02 01:10:49 (90 views)
    - Question for Shogun and others....Sorry to hijack this thread - eliasazem 2010-06-02 03:54:18 (62 views)
      - the smoothest is probably with standard 15' wheels+ tires - shogun 2010-06-02 05:43:08 (79 views)
        
        on wheel size - hvacdude 2010-06-03 02:16:52 (69 views)
        
        did you get a new or used strut assembly? - Rich 1990 750iL 2010-06-05 09:44:50 (41 views)
        
        in the U.S., OEM setup is best for city driving....most people are - 92735i 2010-06-02 18:38:00 (71 views)
        
        M-tech or Alpina suspension does improve high speed cruising - Johan750 2010-06-04 06:54:20 (58 views)
        
        One of my goals is to drive a BMW on the autobahn! - 92735i 2010-06-04 13:20:11 (42 views)
        
        Re:Front Koni Sport and lowering springs.... - peppe750 2010-06-02 18:12:43 (71 views)

Need recommendation on this E32 - smeghead26 2010-06-02 20:37:18 (159 views)
- To make a proper decision based on fact vs emotion... - 92735i 2010-06-04 13:28:57 (61 views)
- Re: Need recommendation on this E32 - smeghead26 2010-06-04 11:42:26 (55 views)
  - Re: recommendation on E32 - joecer 2010-06-04 16:54:14 (44 views)
- Coolant level warning could be leaky headgasket (nt) - vancouverbimmer 2010-06-03 19:35:45 (59 views)
- Car has major problems - oliverr871 2010-06-03 18:55:18 (74 views)
  - Re: Car has major problems - beachman 2010-06-04 13:50:46 (56 views)
    - It's an Alusil - beachman 2010-06-08 16:17:24 (50 views)
    - That might not mean much.. - oliverr871 2010-06-05 01:18:20 (67 views)
      - Re: That might not mean much.. - beachman 2010-06-06 18:40:09 (42 views)
- That's the best looking E32 interior I've seen in a while - 740gti 2010-06-03 00:46:29 (63 views)
- Don't walk, RUN. Two words: parts car. Also I don't trust Craigslist. - bcweir750 2010-06-02 22:39:55 (72 views)
- Re: Need recommendation on this E32 - joecer 2010-06-02 22:04:31 (60 views)
  - Re:recommendation - joecer 2010-06-03 06:52:36 (58 views)
    - I noticed the same 'suggestions' from the owner as joecer - whiteghost 2010-06-03 10:45:05 (77 views)

OT: BMW 320d (E90 sedan) runs 1,013 miles on a single tank of fuel! (pic) (url) - bcweir750 2010-05-27 16:00:30 (115 views)
- Diesel is more expensive than Gasoline/gallon in U.S. (nt) - 92735i 2010-06-01 18:07:05 (53 views)
  - But in a car with over twice the range of gasoline, it's not so straight forward (nt) - bcweir750 2010-06-01 18:27:12 (49 views)
    - at the height of the 'oil crisis' Diesel was 3x gasoline... - 92735i 2010-06-04 13:32:08 (36 views)
      - which oil crisis? 1973? 1981? 2008? - bcweir750 2010-06-04 14:07:31 (49 views)
        
        Now compare it to a new 320i which does 40-44 mpg ;-) - Johan750 2010-06-07 12:30:19 (29 views)
        (Correction) Gasoline $43.35/405 = 10.7 cents per mile (nt) - Patrick C 88 750 170K 2010-06-06 22:49:22 (32 views)
- Yes, but its still a DIESEL. - Johan750 2010-05-28 14:11:54 (59 views)
  - Who DOESN'T want to skip fill-ups while enjoying their 7? - bcweir750 2010-05-28 16:20:46 (75 views)
    - I gave them a chance...but they're not for me. - Johan750 2010-05-30 03:34:38 (64 views)
      - I'm a little confused about whether or not we are talking about the same diesel - bcweir750 2010-05-30 16:23:13 (50 views)
        
        Yes we are - Johan750 2010-06-01 10:38:53 (61 views)
        
        I Did - joecer 2010-06-01 18:27:50 (56 views)
- 0-60 in 7.5 seconds? That's as fast our E32s....hahahah (nt) - oliverr871 2010-05-27 16:34:49 (78 views)
- yes OT: not interested (nt) - hairywithit 2010-05-27 16:21:48 (58 views)
  - I thought it to be a rather remarkable accomplishment on BMW's part. - bcweir750 2010-05-27 16:38:48 (59 views)
    - I should also add that this engine is half the displacement & cylinders of 740! (nt) - bcweir750 2010-05-27 16:42:16 (58 views)
      - I should add it's 16 years newer and has a turbo (nt) - Johan750 2010-05-30 03:38:40 (51 views)
        
        I wonder how many of today's cars will still be on the road in 20 years? (nt) - 92735i 2010-06-07 12:31:47 (36 views)
        
        all BMWs :-) (nt) - steinway 2010-06-07 18:59:56 (36 views)

TCS M60 throttle body + torx bolts = nightmare mode - paulmer 2010-06-04 16:15:49 (74 views)
- Re: TCS M60 throttle body + torx bolts = nightmare mode - beachman 2010-06-04 21:04:10 (52 views)
- Can you get in there with a screw extractor? (nt) - whiteghost 2010-06-04 16:24:56 (54 views)
  - Re: Can you get in there with a screw extractor? - paulmer 2010-06-04 16:32:43 (50 views)
    - Re: Can you get in there with a screw extractor? - joecer 2010-06-04 16:47:14 (53 views)
      - screw extractors look like this, Paul (url) - shogun 2010-06-04 17:02:06 (63 views)
        
        Re: screw extractors look like this, Paul - dan90bmw735iguy 2010-06-05 23:33:56 (48 views)
        
        Re: screw extractor caution - joecer 2010-06-07 16:47:44 (39 views)

A creaky rump... - cvillebimmer 2010-06-04 14:58:26 (79 views)
- I'll bet it's dogbones. - stevebu 2010-06-04 15:29:47 (52 views)
  - My rear end sqeaks like crazy, and all the time. - Rich 1990 750iL 2010-06-05 09:47:21 (45 views)
  - Great tip, thanks! (nt) - cvillebimmer 2010-06-04 16:09:41 (49 views)
    - No more creaking... - cvillebimmer 2010-06-06 18:41:19 (53 views)
    - we just did re-grease my dog bones today, silent now (url) - shogun 2010-06-05 10:32:26 (78 views)
      - Re: we just did re-grease my dog bones today, silent now - cvillebimmer 2010-06-05 14:42:26 (65 views)
        
        pliers were used to remove the wire circlip of the rubber boot (nt) (nt) - hairywithit 2010-06-05 18:31:03 (45 views)
        ditto, mine are 3 years old and toast. (nt) - Rich 1990 750iL 2010-06-05 15:09:58 (42 views)
        
        Pelican Parts has Lemforder Pitman Arms (url) - shogun 2010-06-06 08:24:57 (48 views)
        
        many pics (url) - Take 2010-06-07 09:15:50 (53 views)

Question about e32 rear diffs - cvillebimmer 2010-06-02 10:39:51 (88 views)
- The 735i medium case diffs also have 2 different - whiteghost 2010-06-05 00:16:22 (65 views)
  - Exactly, here's some more pics . . . (pic) - gale 2010-06-05 20:20:04 (121 views)
- Here are the pics w/dimensions (pic) - gale 2010-06-04 22:29:37 (102 views)
  - Pretty certain now I have a medium case with large input/output flanges - cvillebimmer 2010-06-06 15:03:17 (55 views)
    - If Bambi is putting out the kind of power I think it is, Andrew... - bcweir750 2010-06-06 15:35:22 (55 views)
      - Re: If Bambi is putting out the kind of power I think it is, Andrew... - cvillebimmer 2010-06-06 15:59:02 (59 views)
        
        Custom driveshaft too much money? - bcweir750 2010-06-06 17:00:13 (42 views)
        
        Several hundred at least... - cvillebimmer 2010-06-06 18:48:18 (40 views)
      - While we're on the subject, what kind of differential did the E23 745i use? (nt) - bcweir750 2010-06-06 15:38:59 (42 views)
        
        745i used a 2.93s. It has completely different mounting points. (nt) - cvillebimmer 2010-06-06 16:00:37 (34 views)
  - Don, this is great! - cvillebimmer 2010-06-05 07:31:52 (43 views)
- One more related quetion... - cvillebimmer 2010-06-04 10:31:53 (58 views)
  - Re: One more related quetion... - gale 2010-06-04 20:43:22 (54 views)
- Re: Question about e32 rear diffs - gale 2010-06-03 19:48:52 (77 views)
  - PS: have you considered an e34 3.46 LSD from a manual 535i? - gale 2010-06-03 19:55:46 (53 views)
    - Thanks! - cvillebimmer 2010-06-04 10:20:41 (52 views)
- oh wait, is it for the 735?? ... ooops (nt) - rv8flyboy 2010-06-02 22:30:53 (48 views)
- Re: Question about e32 rear diffs - htrdbmr 2010-06-02 11:20:04 (63 views)
  - Hate to hijack, but can the pinion flanges be swapped? - 740gti 2010-06-04 00:14:32 (44 views)
    - Re: Hate to hijack, but can the pinion flanges be swapped? - htrdbmr 2010-06-04 07:37:47 (48 views)
      - I think it does, Thanks! (nt) - 740gti 2010-06-04 17:03:11 (42 views)
  - Re: Question about e32 rear diffs - paulmer 2010-06-02 14:46:04 (50 views)
  - Re: Question about e32 rear diffs - cvillebimmer 2010-06-02 11:27:23 (61 views)
    - Re: Question about e32 rear diffs (url) - rv8flyboy 2010-06-02 22:29:21 (54 views)

rebuilding DK motors improve performance??? - ourv12 2010-06-03 00:23:24 (68 views)
- Re: rebuilding DK motors improve performance??? (pic) - hvacdude 2010-06-03 01:37:01 (105 views)
  - If I need new brushes where do I get them? (nt) - ourv12 2010-06-03 07:35:54 (48 views)
    - never heard that someone needs brushes - shogun 2010-06-03 08:05:06 (64 views)
- it will run again as it should - shogun 2010-06-03 00:45:22 (75 views)
  - Disapointed in my results after DK's cleaning - ourv12 2010-06-05 22:07:31 (71 views)
    - to improve throttle response you need a new EML chip - shogun 2010-06-06 04:52:33 (51 views)
    - Re: Disapointed in my results after DK's cleaning - hvacdude 2010-06-06 03:59:19 (53 views)
      - Re: Disapointed in my results after DK's cleaning - ourv12 2010-06-06 09:59:02 (50 views)
        
        final drive ratio changed over the years on the 750 (url) - shogun 2010-06-06 10:20:06 (53 views)
    - If the o2 sensors haven't been replaced in years - whiteghost 2010-06-05 22:32:07 (49 views)
  - Thanks for your input, I will go ahead and give it a - ourv12 2010-06-03 07:34:21 (49 views)
    - Wow, I have the drivers side DK motor off and cover off - ourv12 2010-06-03 16:17:14 (60 views)
    - Don't forget to resync the throttles!!! - rv8flyboy 2010-06-03 11:57:41 (57 views)
      - I thought I remember reading somewhere that - ourv12 2010-06-03 18:42:05 (48 views)
        
        if you disconnected power to the 2 DME +EML - shogun 2010-06-03 22:42:52 (77 views)
        
        I once drove for a week and the car still would not idle nicely - rv8flyboy 2010-06-06 11:05:02 (50 views)

Code plug - froos 2010-05-31 07:37:27 (65 views)
- Re: Code plug (pic) - froos 2010-06-04 07:15:50 (68 views)
  - that is a grey backplate (url) - shogun 2010-06-04 07:40:45 (61 views)
    - trust me its blue (pic) - froos 2010-06-04 07:53:04 (57 views)
      - that looks better, indeed blue, in circle 2 are the data on blue one (nt) - shogun 2010-06-04 08:07:30 (45 views)
        
        Re: that looks better, indeed blue, in circle 2 are the data on blue one - froos 2010-06-04 08:16:15 (44 views)
        
        Re: that looks better, indeed blue, in circle 2 are the data on blue one - froos 2010-06-04 08:29:54 (44 views)
        
        If you have problems with the coding data send an email - Johan750 2010-06-05 02:22:47 (39 views)
        
        Re: If you have problems with the coding data send an email - froos 2010-06-05 17:25:13 (39 views)

-35 degrees F fixed - Rich 1990 750iL 2010-06-04 09:48:07 (87 views)
- That good to know Rich. Glad you got it fixed. - daryl12 91 735iL 2010-06-05 06:46:52 (35 views)
- Re: -35 degrees F fixed - joecer 2010-06-04 23:04:56 (50 views)
  - no, if the sensor is not connected, temp defaults to -35 (nt) - Rich 1990 750iL 2010-06-05 09:41:31 (43 views)

tranny switch ? - helloball 2010-06-02 13:22:16 (57 views)
- Re: tranny switch ? - rv8flyboy 2010-06-03 12:04:46 (50 views)
  - the key being? - helloball 2010-06-03 14:31:49 (45 views)
    - Re: the key being? - rv8flyboy 2010-06-03 15:33:48 (44 views)
- for the plug housing you can use another one (url) - shogun 2010-06-02 18:31:36 (53 views)
  - if that is not enough, maybe someone can make a pic (url) - shogun 2010-06-02 22:53:29 (48 views)
    - Re: if that is not enough, maybe someone can make a pic - helloball 2010-06-03 14:41:27 (46 views)
      - iluminated gear shifter you can get from me (vid) (url) - shogun 2010-06-03 18:23:21 (64 views)
        
        Re: iluminated gear shifter you can get from me - helloball 2010-06-03 23:02:33 (46 views)
        
        just make me a list of the plugs you want - shogun 2010-06-03 23:33:04 (44 views)
        
        blue connector details - shogun 2010-06-05 08:03:32 (38 views)

Instrument cluster coding plug needed....... - krandoc 2010-06-03 15:21:44 (57 views)
- If you use the plug from a 735 in a 750 cluster - Johan750 2010-06-04 05:55:00 (55 views)
  - Re: If you use the plug from a 735 in a 750 cluster - krandoc 2010-06-04 09:07:29 (56 views)
    - Re: If you use the plug from a 735 in a 750 cluster - Johan750 2010-06-04 11:11:52 (55 views)
- Re: Instrument cluster coding plug needed....... - jcostantino 2010-06-03 20:46:56 (50 views)
  - Re: Instrument cluster coding plug needed....... - krandoc 2010-06-03 23:24:35 (42 views)
    - Re: Instrument cluster coding plug needed....... - jcostantino 2010-06-04 09:22:41 (43 views)
- Re: Instrument cluster coding plug needed....... - jcostantino 2010-06-03 19:27:40 (44 views)

the E34 options retrofit giude, 32 MB, >300 pages (url) - shogun 2010-05-29 06:52:55 (156 views)
- wow! (nt) - vancouverbimmer 2010-06-01 20:08:17 (40 views)
- U da Man! Awesome writeup!!! - beachman 2010-05-31 00:21:38 (43 views)
- I vote Sensei Shogun writes one for the E32 (nt) - rv8flyboy 2010-05-29 16:02:50 (56 views)
  - Second the Motion - All in favor say AYE (nt) - joecer 2010-05-30 12:05:02 (50 views)
    - Wouldn't near all of this stuff in the E34 also fit in an E32? - bcweir750 2010-05-30 15:52:32 (56 views)
      - yes, lot's of it also is for the E32, that is why - shogun 2010-05-30 21:56:36 (51 views)
        
        I remember htrdbmr expressing interest in an underhood light retrofit. - bcweir750 2010-05-31 00:21:04 (43 views)
        
        AFAIK all e32s have the light. (nt) - Johan750 2010-06-01 10:23:02 (44 views)
        
        htrdbmr said in a previous post that his did not. (nt) - bcweir750 2010-06-01 10:29:02 (44 views)
        
        Mine doesn't! - paulmer 2010-06-01 16:18:58 (42 views)
- Whoa! That's fantastic. (nt) - cvillebimmer 2010-05-29 11:38:11 (66 views)
  - Re: Whoa! That's fantastic. - paulmer 2010-05-29 14:23:21 (78 views)
    - AFAIK the m5 cluster won't show the revs properly on the v8 - Johan750 2010-05-30 06:37:59 (45 views)
      - Re: AFAIK the m5 cluster won't show the revs properly on the v8 - paulmer 2010-05-30 14:31:44 (46 views)
        
        They all have a coding plug. And only the late ones (white and blue back) can be - Johan750 2010-06-01 10:27:07 (54 views)
        
        Re: They all have a coding plug. And only the late ones (white and blue back) can be - paulmer 2010-06-01 16:16:38 (46 views)
        
        Re: They all have a coding plug. And only the late ones (white and blue back) can be - Johan750 2010-06-03 12:23:02 (36 views)
        This would make a good DIY project (IF it works) - bcweir750 2010-06-02 16:57:17 (42 views)
        
        IF it works...yee of little faith. I already got it work on an e34 540i - Johan750 2010-06-03 12:25:04 (34 views)
        
        Re: IF it works...yee of little faith. I already got it work on an e34 540i - paulmer 2010-06-03 15:11:46 (32 views)
        
        Swaping the rev counter is the only way. No correct rev on the m5 unit w/v8 (nt) - Johan750 2010-06-04 06:49:09 (28 views)
        
        it is cool... da's why i made this..... (pic) - rv8flyboy 2010-06-02 22:19:25 (64 views)
        
        Yeah, I WANT one (nt) - bcweir750 2010-06-02 22:31:57 (34 views)
        
        No Problem - rv8flyboy 2010-06-03 21:25:32 (39 views)
    - By the way Paul, how is that trans swap going? (nt) - bob91750 2010-05-29 19:31:23 (63 views)
      - Re: By the way Paul, how is that trans swap going? - paulmer 2010-06-01 16:18:16 (64 views)
        
        Re: By the way Paul, how is that trans swap going? - daryl12 91 735iL 2010-06-02 01:30:44 (49 views)

735i Twin Turbo with Toyota 2JZGTE from AUS (url) - shogun 2010-06-03 06:46:09 (104 views)
- more about the whole project (url) - shogun 2010-06-03 18:57:27 (70 views)
  - I'd like that word doc! - paulmer 2010-06-03 21:33:09 (49 views)
    - ask him directly: his nick 'BMWTurbo' on BF (nt) - shogun 2010-06-03 21:44:28 (42 views)
  - Interesting, but hardly unique. - bcweir750 2010-06-03 19:26:10 (62 views)
    - I onmly know of ONE E32 with Toyota 2JZGTE twin turbo - shogun 2010-06-03 20:59:13 (57 views)
      - And that's just as well :-) (nt) - Johan750 2010-06-04 06:47:43 (55 views)

94 740IL, have flat, how to get to lugs? - netwide 2010-06-03 15:06:30 (50 views)
- Unlock by turning to left.....Get large channel lock pliers. Place rag over - krandoc 2010-06-03 15:36:00 (41 views)
- Re: 94 740IL, have flat, how to get to lugs? - paulmer 2010-06-03 15:11:13 (52 views)

If anyone has keyless entry - can you help me? Also, dead telescopic steering!! (pic) - paulmer 2010-06-02 20:06:56 (76 views)
- Re: If anyone has keyless entry - can you help me? Also, dead telescopic steering!! - paulmer 2010-06-02 20:07:59 (70 views)
  - Re: If anyone has keyless entry - can you help me? Also, dead telescopic steering!! - kvangenechten 2010-06-02 21:15:10 (48 views)
    - Figured out why the telescopic steering wouldn't work... - paulmer 2010-06-02 21:31:51 (61 views)

Cooling Hose Retrofits? - davintosh 2010-06-02 16:38:08 (58 views)
- Re: Cooling Hose - joecer 2010-06-02 16:58:56 (47 views)
- Mine has the three way T-fitting. Definitely not factory. - bcweir750 2010-06-02 16:42:09 (45 views)

aux fan resistor? - helloball 2010-06-02 13:39:49 (60 views)

Alpina B12 vs 750 - peppe750 2010-06-01 04:15:21 (73 views)
- Re: Alpina B12 vs 750 - hobbymekk 2010-06-02 07:56:25 (55 views)
- The main difference: alpina parts are expensive and take longer to arrive. (nt) - Johan750 2010-06-01 10:21:50 (47 views)
- Re: Alpina B12 vs 750 - mop 2010-06-01 07:55:06 (66 views)
- Re: Alpina B12 vs 750 - mop 2010-06-01 07:55:03 (58 views)
  - Re:Thanks for the tips... - peppe750 2010-06-01 08:16:30 (53 views)
    - Re: Re:Thanks for the tips... - joecer 2010-06-01 13:13:10 (70 views)
      - Re: Re:Thanks for the tips... - mop 2010-06-01 13:46:25 (47 views)
        
        Thats what they gave us to test - joecer 2010-06-01 17:01:20 (50 views)
- well, in data (url) - shogun 2010-06-01 05:48:30 (77 views)

Aux fan resistor (url) - mop 2010-05-31 17:22:09 (88 views)
- Could u clarify 'Parking'? - rv8flyboy 2010-05-31 23:34:39 (54 views)
  - Re: Could u clarify 'Parking'? - mop 2010-06-01 02:45:58 (46 views)
  - low stage 18A, high 30A, Gert (url) - shogun 2010-05-31 23:44:35 (59 views)
    - Re: low stage 18A, high 30A, Gert - rv8flyboy 2010-06-01 11:56:38 (47 views)
- could also be the low speed relay (url) - shogun 2010-05-31 18:55:08 (61 views)
  - Alpina B11 735 - shogun 2010-06-01 03:05:54 (53 views)
  - Re: could also be the low speed relay - mop 2010-06-01 02:53:09 (50 views)
    - Where this resistor is located in the 750?? - peppe750 2010-06-01 03:36:59 (48 views)
      - at the bottom of the aux fan housing - shogun 2010-06-01 03:56:52 (49 views)
        
        Thanks! - peppe750 2010-06-01 04:12:18 (51 views)
        
        Just checked!!! doesn't work at all.... - peppe750 2010-06-01 06:37:54 (46 views)

5HP30 - beachman 2010-05-21 23:56:23 (181 views)
- Made it worse!! - beachman 2010-05-27 13:21:02 (190 views)
  - Re: Made it worse!! - rv8flyboy 2010-05-27 13:51:07 (169 views)
    - Re: Made it worse!! - beachman 2010-05-27 14:57:21 (140 views)
      - also, the 5hp30 has 2 speed sensors - rv8flyboy 2010-05-27 15:46:46 (143 views)
        
        Re: also, the 5hp30 has 2 speed sensors - beachman 2010-05-27 16:36:59 (141 views)
        
        Re: also, the 5hp30 has 2 speed sensors - rv8flyboy 2010-05-27 20:15:36 (139 views)
        
        Re: also, the 5hp30 has 2 speed sensors - beachman 2010-05-27 23:34:54 (129 views)
        
        Re: also, the 5hp30 has 2 speed sensors - rv8flyboy 2010-05-28 14:39:38 (151 views)
        
        Re: also, the 5hp30 has 2 speed sensors - beachman 2010-05-30 01:55:31 (129 views)
        one more tip - rv8flyboy 2010-05-28 14:42:19 (144 views)
        
        Re: one more tip - beachman 2010-05-29 20:03:46 (141 views)
        
        YES!! - rv8flyboy 2010-05-30 11:23:38 (140 views)
        
        What I did - paulmer 2010-05-31 00:08:57 (132 views)
        
        Re: What I did - rv8flyboy 2010-05-31 17:15:05 (125 views)
        
        WOW - this tranny was over 3Q low!! - beachman 2010-05-30 23:09:33 (4845 views)
        
        detailed transmission service information (url) - shogun 2010-05-30 23:24:31 (4832 views)
        
        Re: detailed transmission service information - beachman 2010-05-31 00:16:56 (36 views)
      - Re: Made it worse!! - rv8flyboy 2010-05-27 15:44:17 (33 views)
- They use the same transmission so it's fine. - oliverr871 2010-05-22 00:21:10 (80 views)
  - Re: They use the same transmission so it's fine. - beachman 2010-05-22 14:52:01 (71 views)
    - Re: They use the same transmission so it's fine. - oliverr871 2010-05-22 21:06:15 (73 views)
      - Re: They use the same transmission so it's fine. - beachman 2010-05-23 00:29:59 (52 views)
        
        Re: They use the same transmission so it's fine. - oliverr871 2010-05-23 03:41:08 (65 views)
        
        we use CASTROL IMPORT MULTIVEHICLE AUTOMATIC TRANSMISSION FLUID - rv8flyboy 2010-05-23 10:08:39 (62 views)
        
        Re: we use CASTROL IMPORT MULTIVEHICLE AUTOMATIC TRANSMISSION FLUID - beachman 2010-05-25 22:33:33 (36 views)
        
        Yes, there is more than one (EXPENSIVE) solution - rv8flyboy 2010-05-26 09:30:36 (42 views)
        
        Re: Yes, there is more than one (EXPENSIVE) solution - beachman 2010-05-31 08:07:07 (35 views)

Amplifiers - joecer 2010-05-30 12:02:57 (63 views)
- Re: Amplifiers - joecer 2010-05-31 16:21:13 (56 views)

Time for new coils? - bimmermeister 2010-05-23 11:12:04 (65 views)
- Re: Time for new coils? - joecer 2010-05-23 11:46:16 (47 views)
  - Re: Time for new coils? - bimmermeister 2010-05-24 00:03:44 (77 views)
    - Forgot to add to the list: O2 sensors (nt) - bimmermeister 2010-05-24 00:05:01 (35 views)
      - Also, no codes on Peake Research tool (nt) - bimmermeister 2010-05-24 00:50:42 (40 views)
        
        Re: Also, no codes on Peake Research tool - joecer 2010-05-24 08:19:29 (59 views)
        
        replaced coils, no improvement - bimmermeister 2010-05-31 00:28:19 (39 views)
        
        Re: no improvement - joecer 2010-05-31 07:32:30 (36 views)
        
        Re: no improvement - bimmermeister 2010-05-31 11:31:07 (33 views)
        
        Re: no improvement - joecer 2010-05-31 16:12:30 (32 views)

1988 750iL M70 V12 A/C fixed! (url) - Hitmanx 2010-05-31 13:43:35 (96 views)

Fuel Injector swap - Now running rough (pic) - BadWrench 91 750iL 2010-05-25 09:25:12 (103 views)
- Re: Now running rough - joecer 2010-05-26 05:57:12 (70 views)
  - Great tip!! - boarddrafter 2010-05-26 16:01:22 (43 views)
- First pull feeds on all six of one bank - Patrick C 88 750 170K 2010-05-25 19:28:46 (44 views)
- electrical connections? - cvillebimmer 2010-05-25 09:53:53 (56 views)
- Re: Fuel Injector swap - Now running rough - rv8flyboy 2010-05-25 09:46:48 (70 views)
  - Re: Fuel Injector swap - Now running rough - BadWrench 91 750iL 2010-05-29 16:13:46 (46 views)
    - Re: Fuel Injector swap - Now running rough - rv8flyboy 2010-05-29 17:44:53 (41 views)
      - junkyard injectors - paulmer 2010-05-29 19:09:37 (56 views)
        
        Re: junkyard injectors - mamboitaliano 2010-05-29 21:21:38 (29 views)
        
        Re: junkyard injectors - Hitmanx 2010-05-31 12:28:26 (30 views)
        Re: junkyard injectors - paulmer 2010-05-29 21:43:38 (51 views)
        
        Re: junkyard injectors - beachman 2010-05-31 08:19:57 (32 views)
        Thank You! (nt) - mamboitaliano 2010-05-30 00:36:01 (26 views)
  - PS mine were not from Lucky 7 (nt) - rv8flyboy 2010-05-25 09:47:16 (48 views)

Tips on removing factory radio? - gfontes 2010-05-30 21:45:57 (45 views)
- if it is like on the E36 (url) - shogun 2010-05-30 22:20:29 (42 views)
  - Re: if it is like on the E36 - beachman 2010-05-30 23:34:29 (50 views)

E32 axle interchange - zee32 2010-05-29 20:31:36 (48 views)
- depends on final drive size/engine - shogun 2010-05-30 06:21:52 (34 views)
  - Re: depends on final drive size/engine - zee32 2010-05-30 18:27:42 (45 views)
    - If you put in the last 7 digits of your VIN number, it should show correct part (nt) - bcweir750 2010-05-30 18:34:14 (30 views)
      - Re: If you put in the last 7 digits of your VIN number, it should show correct part (url) - zee32 2010-05-30 19:38:01 (38 views)
        
        The Part NR search is used to find a specific part number... (pic) - bcweir750 2010-05-30 20:54:27 (41 views)

cluster capacitor data (url) - shogun 2010-05-30 18:45:36 (94 views)

How strong are the rear axles on these cars? Particularly the 750iL - bcweir750 2010-05-29 23:02:16 (43 views)
- very strong. Most common problem is leaks. (nt) - Johan750 2010-05-30 03:15:57 (46 views)
  - never had a problem in 16 years, just make sure CV boot kit is fine - shogun 2010-05-30 06:19:16 (43 views)
    - 16 years puts that for an end of production model, 1994 model year. - bcweir750 2010-05-30 15:48:41 (40 views)
      - I own it since 16 years, 11/88 production (nt) - shogun 2010-05-30 16:15:55 (34 views)
        
        Thanks for the clarification Shogun - bcweir750 2010-05-30 17:22:20 (31 views)

nice artist drawing of the 750 (url) - shogun 2010-05-30 10:27:40 (95 views)
- That was actually a dealership poster back in the 80s (nt) - Johan750 2010-05-30 15:22:40 (39 views)

pan gaskets leaking, but getting better - Rich 1990 750iL 2010-05-27 11:19:49 (89 views)
- I power washed the undercarriage yesterday - Rich 1990 750iL 2010-05-30 14:48:05 (49 views)
- Re: pan gaskets leaking, but getting better - joecer 2010-05-27 12:11:01 (53 views)
- Re: pan gaskets leaking, but getting better - htrdbmr 2010-05-27 12:04:53 (55 views)
  - I didn't think of JB Weld.... - Rich 1990 750iL 2010-05-27 13:16:15 (64 views)
    - I just did my oil pan gasket, the hardest part was (pic) - bob91750 2010-05-27 18:13:33 (108 views)
      - Re: I just did my oil pan gasket, the hardest part was (pic) - bob91750 2010-05-27 18:22:22 (91 views)
        
        What did you use to remove the gasket material from the old oil pan? (nt) - bcweir750 2010-05-27 19:20:45 (58 views)
        
        Re: What did you use to remove the gasket material........ (url) - bob91750 2010-05-27 21:48:24 (55 views)
        
        Re: rear seal - joecer 2010-05-28 14:19:30 (64 views)
        
        Re: rear seal,.........Yes I do have some oil at the rear of (url) - bob91750 2010-05-28 15:35:31 (81 views)
        
        Re: rear seal,??? - joecer 2010-05-28 21:50:18 (43 views)
- Glad you were able to stall the Reaper a little longer, Rich. - bcweir750 2010-05-27 11:57:01 (56 views)
  - I was actually thinking of a total respray last week. - Rich 1990 750iL 2010-05-27 13:19:25 (64 views)

Lower Door Molding - finallall 2010-05-29 17:49:44 (64 views)
- Re: Lower Door Molding (url) - krandoc 2010-05-30 03:50:37 (63 views)
  - Re: Lower Door Molding - finallall 2010-05-30 13:46:53 (38 views)

Weird Tranny Issue - finallall 2010-05-29 01:49:13 (83 views)
- Re: Weird Tranny Issue (url) - gale 2010-05-29 11:25:06 (67 views)
  - Re: Weird Tranny Issue - Hitmanx 2010-05-29 13:47:51 (55 views)
    - Re: Weird Tranny Issue - finallall 2010-05-29 17:44:49 (58 views)
  - Re: Weird Tranny Issue - finallall 2010-05-29 12:39:55 (58 views)
    - Re Tranny Issue - joecer 2010-05-30 12:25:46 (53 views)

What is this? (pic) - fidel101 2010-05-28 14:26:06 (127 views)
- Re: What is this? - beachman 2010-05-28 14:38:08 (73 views)
  - Definitly ABS - Johan750 2010-05-29 01:36:11 (54 views)
  - Re: What is this? - fidel101 2010-05-28 15:24:48 (60 views)
  - I believe you are correct, ABS unit.. (nt) - rv8flyboy 2010-05-28 14:44:23 (55 views)
    - but, if u download the electric manual - rv8flyboy 2010-05-28 14:45:06 (55 views)
      - Re: but, if u download the electric manual - beachman 2010-05-28 23:37:16 (64 views)
        
        Re: but, if u download the electric manual - rv8flyboy 2010-05-30 11:09:49 (47 views)
        
        in the 740 the 4th board is just a bunch of wire connections - rv8flyboy 2010-05-30 11:11:39 (45 views)

Details of the E32 M60B30 replace DME Chip (vid) (url) - bmw740jor 2010-05-30 07:43:48 (58 views)

Huge load on engine when A/C is on - normal? - jcostantino 2010-05-29 23:35:24 (56 views)
- Maybe the DME(PCM) has no signal from ac, so it is not adjusting fuel trim. (nt) - alv12 2010-05-29 23:46:30 (46 views)
  - Re: Maybe the DME(PCM) has no signal from ac, so it is not adjusting fuel trim. - jcostantino 2010-05-29 23:51:07 (48 views)

ac compressor vibration (pic) - dan90bmw735iguy 2010-05-26 17:06:52 (94 views)
- The freon circuit is blocked somewhere? - Patrick C 88 750 170K 2010-05-26 17:24:55 (47 views)
  - Re: The freon circuit is blocked somewhere? - dan90bmw735iguy 2010-05-26 17:48:00 (44 views)
    - Re: The freon circuit is blocked somewhere? (pic) - dan90bmw735iguy 2010-05-26 19:09:08 (62 views)
      - Re: The freon circuit is blocked somewhere? - joecer 2010-05-26 22:13:08 (68 views)
        
        Re: The freon circuit is blocked somewhere? (pic) - dan90bmw735iguy 2010-05-29 00:29:11 (45 views)

EDC hell.....? - sfdon 2010-05-26 12:28:12 (50 views)
- you either have to replace all EDC shocks - shogun 2010-05-26 16:58:20 (71 views)
  - great info thanks! (nt) - sfdon 2010-05-29 00:08:27 (31 views)

What is this sensor? It's the source of an oil leak (pic) - vancouverbimmer 2010-05-28 15:59:07 (102 views)
- Re: What is this sensor? It's the source of an oil leak - gale 2010-05-28 17:08:35 (58 views)
  - thank you very much! (nt) - vancouverbimmer 2010-05-28 17:46:01 (42 views)

She's Done!!!!PICS!!!!! (pic) - helloball 2010-05-26 18:56:59 (173 views)
- She is looking good. - daryl12 91 735iL 2010-05-28 14:14:32 (49 views)
- Re: She's Done!!!!PICS!!!!! - dan90bmw735iguy 2010-05-26 22:02:20 (46 views)
- Re: Done!!!! - joecer 2010-05-26 22:01:31 (44 views)
- good job (nt) - oliverr871 2010-05-26 19:15:40 (44 views)
- Very nice! (nt) - bcweir750 2010-05-26 19:04:10 (42 views)

88 750iL For Sale - bimmerman750il 2010-05-27 17:55:24 (66 views)

25 mpg at 175,000 miles (pic) - Rich 1990 750iL 2010-05-24 22:18:15 (124 views)
- Dude, call me after your next 100,000 mi...then lets talk - 92735i 2010-05-25 12:49:33 (56 views)
- Re: 25 mpg at 175,000 miles - Hitmanx 2010-05-25 04:01:32 (74 views)
  - How much beter with sequential EFI? Not much better. - Johan750 2010-05-25 12:21:12 (43 views)
    - Re: How much beter with sequential EFI? Not much better. - Hitmanx 2010-05-26 02:42:36 (39 views)
      - It can't upshift to 5th gear to lower the revs ;-) (nt) - Johan750 2010-05-27 12:42:04 (37 views)
        
        Re: It can't upshift to 5th gear to lower the revs ;-) - Hitmanx 2010-05-27 17:42:12 (34 views)
  - 24 MPG @ 70 MPH on the 740iL (nt) - oliverr871 2010-05-25 09:26:48 (54 views)

looking for ideas - helloball 2010-05-26 18:06:52 (37 views)
- Re: looking for ideas - htrdbmr 2010-05-27 12:00:57 (38 views)
- Re:r ideas - joecer 2010-05-26 22:31:55 (49 views)

Boiling Crazy - trades707 2010-05-26 13:47:58 (68 views)
- Re: Boiling Crazy - e32express735i 2010-05-27 09:28:44 (38 views)
- Re: Boiling Crazy - oldmech 1992 735I 263K 2010-05-26 15:37:26 (33 views)
- Have you checked the radiator? - Rich 1990 750iL 2010-05-26 14:17:38 (37 views)
  - Re: Have you checked the radiator? - trades707 2010-05-26 15:05:27 (40 views)
    - There is one way to test a radiator. Do a flush test on the radiator. - bcweir750 2010-05-26 15:13:43 (45 views)
      - that does not help that much, can be partly blocked (url) - shogun 2010-05-26 18:01:49 (49 views)
        
        Check your plugs - joecer 2010-05-26 22:27:06 (61 views)

750iL M70 V12 Belt Adjuster Shocks ... Lifespan? (pic) (url) - Hitmanx 2010-05-25 05:37:31 (116 views)
- Re: 750iL M70 V12 Belt Adjuster Shocks ... Lifespan? - bimmermeister 2010-05-25 10:42:55 (58 views)
  - Re: 750iL M70 V12 Belt Adjuster Shocks ... Lifespan? - Hitmanx 2010-05-26 10:03:33 (40 views)
    - Lifespan - bimmermeister 2010-05-26 19:33:38 (38 views)
      - Re: Lifespan - Hitmanx 2010-05-26 20:34:20 (40 views)
        
        Take them off, spin the pulleys and check the plastic pivot bushings for play (nt) - bimmermeister 2010-05-27 00:33:55 (53 views)

730i V8 1993 won't start hot weather - tomsky 2010-05-25 05:12:01 (53 views)
- Re: 730i V8 1993 won't start hot weather - rv8flyboy 2010-05-25 09:44:29 (45 views)
  - Re: 730i V8 1993 won't start hot weather - cvillebimmer 2010-05-25 09:56:44 (48 views)
    - Re: 730i V8 1993 won't start hot weather - tomsky 2010-05-26 15:21:49 (34 views)

Transmission issue (pic) - jay750il 2010-05-22 15:38:51 (160 views)
- Kirk Koeller telephone numbers - Claudio 2010-05-23 22:51:56 (63 views)
- Re: Transmission issue (url) - Claudio 2010-05-23 21:51:50 (50 views)
  - Re: Transmission issue - jay750il 2010-05-23 22:36:41 (44 views)
- Re: Transmission issue - beachman 2010-05-23 00:42:15 (62 views)
  - Re: Transmission issue - jay750il 2010-05-23 21:43:15 (52 views)
- Re: Transmission issue - joecer 2010-05-22 22:46:07 (66 views)
  - Re: Transmission issue - jay750il 2010-05-23 21:50:42 (55 views)
    - Re: Transmission issue - joecer 2010-05-24 08:24:10 (45 views)
    - usually it is not a transmission issue (url) - shogun 2010-05-24 01:24:05 (80 views)
      - Re: usually it is not a transmission issue - jay750il 2010-05-25 18:39:09 (66 views)
        
        quick question - hairywithit 2010-05-25 20:02:28 (59 views)
        
        Re: quick question - jay750il 2010-05-25 21:26:26 (61 views)
        
        next one - hairywithit 2010-05-26 03:40:51 (48 views)
        
        WARNING - hairywithit 2010-05-26 03:49:17 (45 views)
        
        Re: quick question - jay750il 2010-05-25 20:11:43 (41 views)
        
        so the DKs were dirty and did not move (url) - shogun 2010-05-25 19:01:24 (51 views)
        
        Re: so the DKs were dirty and did not move - jay750il 2010-05-25 20:33:45 (43 views)

Fixing a popping cracking seat (url) - shogun 2010-05-26 02:26:32 (62 views)

Two Questions - fidel101 2010-05-23 21:17:30 (81 views)
- Re: Two Questions (pic) - Claudio 2010-05-23 21:38:40 (84 views)
  - Oops! - Claudio 2010-05-23 21:42:34 (52 views)
- Re: Two Questions - joecer 2010-05-23 21:30:44 (52 views)
  - Re: Two Questions - fidel101 2010-05-24 20:30:20 (38 views)
    - Look for a good used one from a salvage yard... - cvillebimmer 2010-05-25 09:58:43 (56 views)

How to fix seatback twists and seat cable failures the easy way! (pic) (url) - oliverr871 2010-05-21 12:29:17 (199 views)
- Re: How to fix seatback twists and seat cable failures the easy way! - Claudio 2010-05-23 22:45:42 (44 views)
  - Heatgun is not as precise as a small flame. (nt) - oliverr871 2010-05-25 09:28:02 (33 views)
- Re: How to fix seatback twists and seat cable failures the easy way! - kvangenechten 2010-05-21 16:46:17 (52 views)
- Nice one! (nt) - whiteghost 2010-05-21 14:15:11 (37 views)
  - - cvillebimmer 2010-05-21 14:21:19 (39 views)

I cannot find this P/N - peppe750 2010-05-24 04:19:50 (53 views)
- Can u post a picture of the diagram? maybe a link - rv8flyboy 2010-05-24 16:21:12 (35 views)
- Go through the diagrams and see which part it is - Johan750 2010-05-24 04:51:09 (39 views)
  - Re: Go through the diagrams and see which part it is - joecer 2010-05-24 07:36:29 (46 views)
    - Re: Go through the diagrams and see which part it is - Johan750 2010-05-24 10:48:03 (38 views)
      - Re: Go through the diagrams and see which part it is - peppe750 2010-05-24 12:47:19 (35 views)
      - Re: Go through the diagrams and see which part it is - peppe750 2010-05-24 12:46:44 (36 views)
        
        Re: fuel supply diagrams - joecer 2010-05-24 18:26:39 (38 views)
        based on your VIN (url) - shogun 2010-05-24 16:26:52 (47 views)

Detailed interior after installation of manual pedal cluster.. (pic) - paulmer 2010-05-24 03:01:14 (130 views)
- Nice Job !!! (nt) - rv8flyboy 2010-05-24 09:45:25 (45 views)

Two problems - rbliss 2010-05-22 13:00:15 (72 views)
- Re: Two problems - beachman 2010-05-23 22:48:02 (50 views)
- Have you checked for codes yet? - whiteghost 2010-05-22 14:10:23 (59 views)
  - Re: Have you checked for codes yet? - rbliss 2010-05-23 13:20:39 (65 views)
    - If you haven't gotten anything back from the - whiteghost 2010-05-23 17:27:50 (53 views)
    - Re: Have you checked for codes yet? - dan90bmw735iguy 2010-05-23 16:17:16 (49 views)

Amp & Sunwoofer - gronz 2010-05-21 18:56:51 (67 views)
- Re: Amp & Sunwoofer - joecer 2010-05-22 22:54:05 (66 views)

Brake Pads - captkitts 2010-05-21 15:46:48 (49 views)
- Re: Brake Pads - rv8flyboy 2010-05-21 16:01:19 (50 views)
  - Re: Brake Pads - captkitts 2010-05-22 00:25:19 (28 views)

BMW Electrical Manuals Online (url) - shogun 2010-05-21 09:55:05 (81 views)

BMW Car Radio Stereo Audio Wiring Diagram (url) - shogun 2010-05-21 02:43:54 (86 views)