The 7 Series E23 Forum

sticky: NEW FORUM: Deals & Offers (url) - DavidC 2010-02-12 01:26:41 (1107 views)

sticky: How to add a photo to your signature. (url) - DavidC 2009-04-07 01:21:03 (4953 views)

sticky: How to upload and insert photos into messages (pic) (url) - DavidC 2009-02-15 10:02:42 (5949 views)

sticky: Engine components Pictures for E23 (pic) - CNN-090 2006-06-24 09:09:12 (12519 views)

i think i'm missing something on the intake (2 ?'s) - dragonbar 2010-03-08 11:43:27 (24 views)
- Can you post a VIN, please? Last 7 digits only... - Vern 2010-03-11 23:36:34 (1 views)
  - Re: Can you post a VIN, please? Last 7 digits only... - Hitmanx 2010-03-12 01:46:34 (1 views)
- I think Euros are different. - demet 2010-03-08 14:06:32 (17 views)
  - Re: I think Euros are different. - dragonbar 2010-03-08 15:37:09 (14 views)
    - Re: I think Euros are different. - dragonbar 2010-03-09 07:58:49 (12 views)
      - Call around the local parts places and ask... - demet 2010-03-09 08:46:40 (12 views)
    - Re: I think Euros are different. - Hitmanx 2010-03-08 18:17:58 (7 views)
    - Well if you want you can use a 1-wire but ... - demet 2010-03-08 17:52:26 (12 views)

1986 e23 735i fuse block diagram - airgeorge10 2010-03-02 11:53:56 (22 views)
- Re: 1986 e23 735i fuse block diagram - kff 2010-03-03 10:33:32 (16 views)
  - Re: 1986 e23 735i fuse block diagram - airgeorge10 2010-03-03 10:52:58 (20 views)
    - Not a fuse issue, George... - Vern 2010-03-12 00:41:34 (0 views)

Trans performance questions - cjarvis 2010-02-19 18:12:50 (97 views)
- I'm slow on the uptake... (url) - cjarvis 2010-03-03 17:54:50 (27 views)
  - Re: I'm slow on the uptake... - Hitmanx 2010-03-03 18:57:18 (22 views)
    - There are lotsa guys using 733i Motronic flex plates - Vern 2010-03-12 00:33:20 (1 views)
- Here is some info from experience... - Vern 2010-02-28 02:29:34 (51 views)
  - Re: Here is some info from experience... - matthewt 2010-02-28 22:00:15 (42 views)
    - To piggyback Matthew's comment - Vern 2010-03-02 01:01:06 (29 views)
- Re: Trans performance questions - Hitmanx 2010-02-19 23:20:51 (63 views)
- Re: Trans performance questions - Hitmanx 2010-02-19 20:52:40 (123 views)
- Re: Trans performance questions - Hitmanx 2010-02-19 20:15:13 (73 views)
- This one is for Joe Gisler to answer - Area52 2010-02-19 19:53:13 (57 views)

how to replace SI board on 86 735i(e23) (nt) - airgeorge10 2010-03-03 11:52:14 (18 views)
- Not all that hard... - Vern 2010-03-12 00:11:19 (1 views)

Brinzit Pics Please - dragonbar 2010-03-04 08:59:30 (23 views)
- Any pics in the archives, both here and The Roach are long gone - Vern 2010-03-11 23:56:49 (2 views)

E23 race car on the Bay in the UK (url) - philipuk 2010-03-09 16:59:53 (40 views)
- This is the same kind of advert as an M528e - Vern 2010-03-11 23:19:51 (8 views)
- Re: E23 race car on the Bay in the UK - strobachyzoo 2010-03-09 19:59:29 (12 views)

Rare e23, Evern rarer option CB radio what a hoot (pic) - dans733i 2010-03-08 11:50:19 (70 views)
- 733i 5-speed not all that rare. 735i U.S. 5 speed was even available - Vern 2010-03-11 23:02:20 (2 views)
- Picture of Owners Manual (pic) - dans733i 2010-03-08 11:58:45 (47 views)
  - Re: Picture of Owners Manual - dragonbar 2010-03-08 13:31:10 (31 views)
    - Re: Picture of Owners Manual - dans733i 2010-03-08 14:02:47 (27 views)
      - Re: Picture of Owners Manual - rgrimespe 2010-03-08 19:40:37 (17 views)
        
        Re: Picture of Owners Manual - matthewt 2010-03-09 20:08:13 (11 views)
        
        Re: Picture of Owners Manual - dans733i 2010-03-10 08:45:15 (7 views)

Audible Ticking at higher rpms? - clemsoncpa 2010-03-10 22:07:12 (13 views)
- What kind of gasoline are you using? - Vern 2010-03-11 22:52:57 (3 views)
- Re: Audible Ticking at higher rpms? - Hitmanx 2010-03-10 22:51:03 (7 views)

Visit the BimmerBoard Store on Amazon.com!

Gas tank (nt) - goms187 2010-03-08 21:18:40 (10 views)
- Guess that will teach me to hit enter - goms187 2010-03-08 21:21:21 (23 views)
  - Those them mountains, are they in CT? - demet 2010-03-09 09:04:07 (17 views)
    - No the picture was taken on the drive to vintge at the vineyards - goms187 2010-03-11 12:17:38 (12 views)
      - No problem. - demet 2010-03-11 19:20:57 (6 views)

Shop Recommendation in DC Area - sixappeal 2010-03-08 17:37:35 (9 views)
- Re: Shop Recommendation in DC Area (url) - kff 2010-03-10 15:57:43 (12 views)
  - Re: Shop Recommendation in DC Area - sixappeal 2010-03-10 17:51:51 (11 views)
    - Re: Shop Recommendation in DC Area (url) - kff 2010-03-11 18:26:33 (4 views)

New 733i Owner, Pics and looking for A few items (pic) - dans733i 2010-03-04 12:18:39 (109 views)
- By a stroke of luck I just unearthed a hoard of clusters...... - philipuk 2010-03-11 17:14:12 (4 views)
- Re: New 733i Owner, Pics and looking for A few items - BigBruce 2010-03-07 08:21:09 (19 views)
  - Instrument Cluster - dans733i 2010-03-08 12:12:06 (17 views)
  - Instrument Cluster - dans733i 2010-03-08 12:11:39 (13 views)
- Re: New 733i Owner, Pics and looking for A few items - cpseapeacp 2010-03-06 17:02:42 (17 views)
  - Re: New 733i Owner, Pics and looking for A few items (pic) - dans733i 2010-03-08 12:10:04 (31 views)
    - Re: New 733i Owner, Pics and looking for A few items - matthewt 2010-03-09 20:11:09 (8 views)
- Re: New 733i Owner, Pics and looking for A few items - rgrimespe 2010-03-04 17:37:52 (39 views)
  - scanned manual and guide - dans733i 2010-03-08 12:14:37 (13 views)
  - Re: New 733i Owner, Pics and looking for A few items - dans733i 2010-03-04 19:08:45 (27 views)
    - Re: New 733i Owner, Pics and looking for A few items - rgrimespe 2010-03-04 19:45:07 (34 views)

Struts done! Now for the debrief... - limeyexpat 2010-03-08 09:15:17 (33 views)
- Re: Struts done! Now for the debrief... - donstevens 2010-03-11 08:37:08 (10 views)
- Bilstien HDs? Where'd you buy them? (nt) - samspade 2010-03-10 22:23:26 (9 views)
  - Re: Bilstien HDs? Where'd you buy them? - limeyexpat 2010-03-10 23:58:10 (8 views)
- as a suggestion... - johnhstein, 85-M6CSi, 85 745i 2010-03-10 11:56:04 (18 views)
  - Re: as a suggestion... - limeyexpat 2010-03-10 18:50:07 (12 views)
- did you replace the strut bearings (url) - johnhstein, 85-M6CSi, 85 745i 2010-03-09 09:24:16 (17 views)
  - Re: did you replace the strut bearings - limeyexpat 2010-03-09 18:59:24 (14 views)
    - Re: did you replace the strut bearings - Hitmanx 2010-03-09 20:53:40 (11 views)
      - Re: did you replace the strut bearings - limeyexpat 2010-03-09 23:01:45 (12 views)

Starter Terminal Low Voltage - Only 0.8volt (pic) (url) - Oka 2010-02-23 18:15:04 (148 views)
- Re: Starter Terminal Low Voltage - Only 0.8volt - Hitmanx 2010-03-11 01:32:46 (8 views)
- Hey Oka, I'm responding to you up here, instead of all the way down there. - demet 2010-03-03 17:37:42 (24 views)
- I am sorry but the paper thin shim stuff sounds like BS to me as it would cause - Roy In GA 2010-03-03 16:28:40 (21 views)
  - I tend to agree, since all my cars never came with these shims. (nt) - demet 2010-03-03 16:53:40 (21 views)
    - Re: I tend to agree, since all my cars never came with these shims. - Oka 2010-03-03 19:56:08 (25 views)
- Been there done that. Get a new ignition switch. - ejonesie22 2010-03-02 22:59:55 (20 views)
- Re: Starter Terminal Low Voltage - Only 0.8volt - limeyexpat 2010-03-02 19:52:17 (27 views)
  - Super Idea But . . . - Oka 2010-03-03 02:08:35 (23 views)
    - Re: Super Idea But . . . - limeyexpat 2010-03-03 07:50:14 (20 views)
- THIS THREAD IS so far to the right I can't open it anymore!! (nt) - Roy In GA 2010-03-02 13:09:13 (36 views)
  - LOL, it's blending in with the margins. - peeeot 2010-03-04 23:12:23 (14 views)
  - Unfortunately so - Oka 2010-03-03 02:11:51 (28 views)
- Re: Starter Terminal Low Voltage - Only 0.8volt (url) - limeyexpat 2010-02-26 19:23:33 (49 views)
- Re: Starter Terminal Low Voltage - Only 0.8volt (url) - limeyexpat 2010-02-23 23:20:24 (44 views)
  - 'E' Goes To 'C' (nt) - Oka 2010-02-24 03:01:33 (44 views)
    - yes 'E' Goes To 'C' (nt) - goms187 2010-03-07 12:40:13 (10 views)
- Download the ETM for pictoral reference (url) - Area52 2010-02-23 23:06:27 (39 views)
  - Re: Download the ETM for pictoral reference - Oka 2010-02-24 03:08:10 (37 views)
- Hey Oka... - Area52 2010-02-23 22:58:52 (57 views)
- just a guess but, ignition switch? - goms187 2010-02-23 21:58:08 (44 views)
  - Re: just a guess but, ignition switch? - Oka 2010-02-23 22:43:34 (38 views)
    - some answers for you.... - sfdon 2010-02-24 14:12:13 (59 views)
      - Re: some answers for you.... - Oka 2010-02-24 16:34:39 (58 views)
        
        do this.... - sfdon 2010-02-25 01:14:35 (61 views)
        
        I Got These . . . - Oka 2010-02-25 11:37:23 (38 views)
        
        Apologies for multiple replies - But... - limeyexpat 2010-02-25 23:43:18 (47 views)
        Re: I Got These . . . - limeyexpat 2010-02-25 23:18:55 (45 views)
        
        Re: I Got These . . .OOPS-only one black wire... (nt) - limeyexpat 2010-02-25 23:24:18 (41 views)
        
        A couple of questions - demet 2010-02-25 20:50:21 (58 views)
        
        Re: A couple of questions (pic) - Oka 2010-02-26 05:19:03 (62 views)
        
        Is the only change the meter's black probe on the battry? - demet 2010-02-26 11:24:07 (41 views)
        
        Re: Is the only change the meter's black probe on the battry? - Oka 2010-02-26 15:23:36 (44 views)
        
        demet - Pin Jumping Question (url) - Oka 2010-02-27 04:16:44 (38 views)
        
        By-passing a relay is easy, when you understand it... (pic) (url) - demet 2010-02-27 11:25:53 (59 views)
        
        Re: By-passing a relay is easy, when you understand it... - Oka 2010-02-27 22:51:33 (41 views)
        
        'at start' means 'while cranking' or in your words 'full turn of ign' - demet 2010-02-27 23:34:46 (37 views)
        
        Still Work In Progress . . . - Oka 2010-03-01 03:55:46 (40 views)
        
        Back to Diagnostic step 1... - Area52 2010-03-01 08:23:16 (43 views)
        
        Area52 - Oka 2010-03-02 02:49:14 (32 views)
        
        DEMET - Possible Culprit (Mystery) (url) - Oka 2010-03-02 03:12:18 (40 views)
        
        Re: DEMET - Possible Culprit (Mystery) - limeyexpat 2010-03-02 07:26:17 (33 views)
        
        limeyexpat . . . Yep You Mentioned It, But . . . - Oka 2010-03-02 10:59:19 (41 views)
        
        Close the hood PLEASE! - Area52 2010-03-02 18:55:16 (28 views)
        
        Re: Close the hood PLEASE! - Oka 2010-03-03 17:30:39 (25 views)
        
        Another Question - Oka 2010-03-03 17:48:32 (32 views)
        
        Congratulations! - Area52 2010-03-03 19:48:34 (26 views)
        
        OK! But . . . - Oka 2010-03-04 10:54:05 (21 views)
        Re: OK! But . . . - Area52 2010-03-04 20:41:11 (23 views)
        In Conclusion! - Oka 2010-03-05 01:38:42 (25 views)
        
        sfdon . . . More Questions For You Please . . . - Oka 2010-02-24 23:54:19 (61 views)
        
        Oka- I'm sorry but I have a shop full of cars to fix. - sfdon 2010-02-25 23:21:45 (58 views)

WTB: e23 Parts + Euro Light Assemblies - grsmonkey 2010-03-10 23:02:59 (10 views)

Parting out 1987 e23 735i L7 - bmwforlife 2010-03-06 12:30:00 (54 views)
- Re: Parting out 1987 e23 735i L7 - limeyexpat 2010-03-09 23:02:49 (8 views)
- Re: Parting out 1987 e23 735i L7 - Hitmanx 2010-03-09 20:51:58 (9 views)
- What color is the car? - jason733i 2010-03-09 13:42:17 (9 views)
- Re: Parting out 1987 e23 735i L7 - dragonbar 2010-03-09 11:22:45 (14 views)

What's the best engine oil. - seventhreethree 2010-02-04 18:53:25 (87 views)
- Re: What's the best engine oil. - dans733i 2010-03-09 08:27:20 (11 views)
- Re: What's the best engine oil. - chicagomark 2010-03-09 00:05:20 (5 views)
- Re: What's the best engine oil. - donstevens 2010-02-06 17:06:17 (63 views)
  - Re: What's the best engine oil. - donstevens 2010-02-06 17:10:08 (55 views)
- Re: What's the best engine oil. - Hitmanx 2010-02-04 21:34:36 (73 views)
- Re: What's the best engine oil. - Area52 2010-02-04 19:18:49 (67 views)
  - Re: What's the best engine oil. - seventhreethree 2010-02-04 19:49:44 (68 views)

vacuum leak found - dragonbar 2010-03-02 17:52:51 (52 views)
- a little late on this one... but.... - johnhstein, 85-M6CSi, 85 745i 2010-03-07 09:11:16 (20 views)
  - of particular importance for 745's - johnhstein, 85-M6CSi, 85 745i 2010-03-07 09:13:18 (12 views)
- Re: vacuum leak found - rgrimespe 2010-03-02 18:03:51 (19 views)
  - Re: vacuum leak found - dragonbar 2010-03-03 07:44:15 (20 views)
    - Re: vacuum leak found - rgrimespe 2010-03-03 14:49:43 (25 views)
      - Remember that the flow thru the check valve is toward the engine, make sure it - Roy In GA 2010-03-03 16:43:15 (18 views)
        
        Re: Remember that the flow thru the check valve is toward the engine, make sure it - dragonbar 2010-03-03 17:01:50 (23 views)
        
        Re: Remember that the flow thru the check valve is toward the engine, make sure it - dragonbar 2010-03-03 17:18:39 (18 views)
        Re: Remember that the flow thru the check valve is toward the engine, make sure it (pic) - dragonbar 2010-03-03 17:04:10 (44 views)
        
        Here's mine ... (url) - demet 2010-03-03 17:19:31 (28 views)
        
        Re: Here's mine ... - dragonbar 2010-03-03 17:29:26 (21 views)
      - I don't think that is correct... - demet 2010-03-03 15:00:03 (24 views)
        
        Re: I don't think that is correct... - rgrimespe 2010-03-03 18:39:24 (21 views)
        Re: I don't think that is correct... - dragonbar 2010-03-03 16:46:53 (22 views)
        
        Yes that's the principle... - demet 2010-03-03 17:00:06 (19 views)
        
        Re: Yes that's the principle... - dragonbar 2010-03-04 08:07:10 (22 views)
        
        Re: Yes that's the principle... - rgrimespe 2010-03-04 10:21:28 (19 views)
        
        Re: Yes that's the principle... - dragonbar 2010-03-04 12:47:36 (15 views)
        
        Re: Yes that's the principle... - rgrimespe 2010-03-04 15:31:58 (24 views)
        
        Re: Yes that's the principle... - dragonbar 2010-03-05 07:47:14 (19 views)
        
        Re: Yes that's the principle... A bit O/T - limeyexpat 2010-03-08 09:19:51 (13 views)
        Re: Yes that's the principle... - rgrimespe 2010-03-05 15:31:32 (17 views)
        
        Re: Yes that's the principle... - dragonbar 2010-03-08 08:55:34 (11 views)
        
        You got it! (nt) - demet 2010-03-08 11:16:59 (9 views)

Wipers not working - '84 733i - datcord 2010-03-05 21:59:10 (22 views)
- FIXED - Seems to have been loose wiring. - datcord 2010-03-07 13:22:44 (21 views)
- Just in case you want to tackle the wiper switch. (pic) - demet 2010-03-06 13:08:51 (38 views)
  - Re: Just in case you want to tackle the wiper switch. - datcord 2010-03-06 15:36:22 (18 views)
- Re: Wipers not working - '84 733i - 06impreza 2010-03-05 22:35:46 (14 views)
  - Re: Wipers not working - '84 733i - datcord 2010-03-06 12:17:10 (14 views)
  - Mine stopped when the toggle bar popped off. Check your linkage. (nt) - Roy In GA 2010-03-06 12:15:31 (9 views)

i need some help learning how to... - dragonbar 2010-02-28 16:24:30 (37 views)
- Re: i need some help learning how to... - kff 2010-03-02 10:38:41 (23 views)
  - Manual Transmission (nt) - dragonbar 2010-03-04 10:11:30 (18 views)
    - Easy check is to listen to the TPS - kff 2010-03-04 13:18:45 (17 views)
      - checking the TPS - kff 2010-03-07 13:19:07 (8 views)
  - For the pressure check you need a guage, a tee, 2 hose barbs for the tee and a - Roy In GA 2010-03-02 13:20:53 (20 views)
- Re: i need some help learning how to... - rgrimespe 2010-03-01 15:25:07 (22 views)

Trying to figure out plan of attack for O2 sensor, vacuum, idle mixture tuning - peeeot 2010-03-04 01:32:47 (41 views)
- All of what John says plus some ramblings of my own. - demet 2010-03-04 19:24:52 (36 views)
  - The Bentley, WRONG?! haha. - peeeot 2010-03-05 18:56:56 (25 views)
- I mis-spoke, you said .05, I read .5 big diff. ...more - johnhstein, 85-M6CSi, 85 745i 2010-03-04 09:54:59 (32 views)
  - So the o2 is out of suspicion until after injector cleaning? - peeeot 2010-03-04 10:40:58 (30 views)
    - a little on o2 sensors - johnhstein, 85-M6CSi, 85 745i 2010-03-06 17:51:55 (19 views)
    - huge difference... MUCH smoother .... - johnhstein, 85-M6CSi, 85 745i 2010-03-04 12:11:54 (30 views)
      - I already replaced my seals. - peeeot 2010-03-04 18:06:53 (16 views)
        
        RCENG sends them back with new seals.... (nt) - johnhstein, 85-M6CSi, 85 745i 2010-03-06 17:45:31 (11 views)
- Several thoughts.... - johnhstein, 85-M6CSi, 85 745i 2010-03-04 09:49:20 (35 views)
  - +1 on injector cleaning. - ejonesie22 2010-03-05 15:13:38 (26 views)
    - I don't know how old my FPR is, I'll add it to the parts list (nt) - peeeot 2010-03-05 18:58:29 (10 views)
    - Re: +1 on injector cleaning. - Hitmanx 2010-03-05 17:52:38 (18 views)
      - Re: +1 on injector cleaning. - matthewt 2010-03-06 00:05:49 (15 views)

video: Headlight wipers in action (vid) - 06impreza 2010-02-25 12:42:51 (85 views)
- Please do a write up - donstevens 2010-03-05 00:14:33 (18 views)
- Re: video: Headlight wipers in action - Hitmanx 2010-02-25 19:18:10 (45 views)
  - Re: video: Headlight wipers in action - 06impreza 2010-02-25 23:14:47 (52 views)
    - Re: video: Headlight wipers in action - Hitmanx 2010-02-26 00:15:35 (34 views)
      - Re: video: Headlight wipers in action - 06impreza 2010-02-26 12:06:35 (37 views)
        
        Use the intesive wash pump ground wire as the trigger to your relay. (url) - demet 2010-02-26 17:42:28 (41 views)
    - Re: video: Headlight wipers in action - Oka 2010-02-26 00:15:21 (46 views)

what wheels are these? (pic) - dragonbar 2010-03-04 12:26:47 (55 views)

Front end damage (pic) - larryhdavis 2010-02-27 16:29:17 (90 views)
- Tractor and Comealongs - jason733i 2010-02-28 20:47:30 (25 views)
  - Re: Tractor and Comealongs - jason733i 2010-02-28 20:53:44 (31 views)
- Re: Front end damage - BigBruce 2010-02-27 17:50:59 (43 views)
  - Re: Front end damage - stevebu 2010-02-28 16:10:47 (31 views)
    - Re: Front end damage - larryhdavis 2010-03-01 23:44:44 (24 views)
      - Re: Front end damage - Hitmanx 2010-03-02 00:17:10 (24 views)
        
        Re: Front end damage - strobachyzoo 2010-03-04 10:12:40 (22 views)

Oil light not working, no light before startup + some niggles - gefeldz 2010-03-03 12:03:26 (34 views)
- Hey, welcome. - demet 2010-03-03 17:14:03 (27 views)
  - Look at the last picture in this post. It is the heater valve. (url) - Roy In GA 2010-03-04 00:54:56 (20 views)
- I think you have the Vacuum system used on some cars in the 80s, it is like - Roy In GA 2010-03-03 17:07:48 (28 views)
  - Forgot the URL (url) - Roy In GA 2010-03-03 17:11:10 (42 views)

Just acquired '85 735i euro - Smoke from exhaust - 1st BMW - tangwrangler 2010-03-02 09:52:51 (37 views)
- Re: Just acquired '85 735i euro - Smoke from exhaust - 1st BMW - matthewt 2010-03-03 11:31:31 (18 views)
- Re: Just acquired '85 735i euro - Smoke from exhaust - 1st BMW - Hitmanx 2010-03-02 21:37:22 (24 views)
- White, blue or black? (nt) - Vern 2010-03-02 11:00:40 (19 views)
  - Re: White, blue or black? - tangwrangler 2010-03-02 19:34:29 (27 views)
    - Re: White, blue or black? - sicstang03 2010-03-03 09:00:08 (24 views)
      - Re: White, blue or black? - Hitmanx 2010-03-03 19:00:11 (18 views)
      - Re: White, blue or black? - tangwrangler 2010-03-03 15:02:08 (24 views)
        
        Re: White, blue or black? - Hitmanx 2010-03-03 22:16:28 (19 views)
      - Re: White, blue or black? - sicstang03 2010-03-03 09:01:19 (25 views)

Torque converter - hardworkingniceguy 2010-02-25 14:48:15 (52 views)
- I have one from my 85 745 but the tranny died on a long distance trip. - demet 2010-02-25 20:38:37 (48 views)
  - Re: I have one from my 85 745 but the tranny died on a long distance trip. - hardworkingniceguy 2010-02-26 11:29:03 (38 views)
    - About as far as you can get! - demet 2010-02-26 14:12:30 (47 views)
      - Re: About as far as you can get! - hardworkingniceguy 2010-03-03 19:02:21 (23 views)
      - Re: About as far as you can get! - hardworkingniceguy 2010-03-01 21:14:32 (26 views)
        
        Re: About as far as you can get! - Hitmanx 2010-03-01 22:15:48 (25 views)
      - Re: About as far as you can get! - Hitmanx 2010-02-26 14:17:05 (40 views)
- Re: Torque converter - Hitmanx 2010-02-25 15:00:04 (51 views)
  - Re: Torque converter - hardworkingniceguy 2010-02-26 11:31:41 (39 views)
    - Re: Torque converter - Hitmanx 2010-02-26 18:21:09 (39 views)

1986 735i (e23) tach just stopped working, checked fuses (nt) - airgeorge10 2010-03-03 11:11:41 (11 views)
- Re: 1986 735i (e23) tach just stopped working, checked fuses - matthewt 2010-03-03 11:35:03 (17 views)
  - Re: 1986 735i (e23) tach just stopped working, checked fuses - airgeorge10 2010-03-03 11:51:06 (17 views)
    - You have to take the cluster apart to get to the SI board which is in the back. (nt) - Roy In GA 2010-03-03 16:46:00 (12 views)

Normal manifold vacuum reading? - peeeot 2010-03-02 00:01:15 (23 views)
- Re: Normal manifold vacuum reading? - Hitmanx 2010-03-02 00:27:27 (20 views)
  - Minumum of 16 inches vacuum. Anything else is a Vac leak - Vern 2010-03-02 00:52:05 (27 views)
    - Re: Minumum of 16 inches vacuum. Anything else is a Vac leak - rgrimespe 2010-03-02 10:24:08 (25 views)
      - I've had a chain jump a tooth while driving home. Scary stuff. - Vern 2010-03-02 10:56:41 (24 views)
        
        I had 15' from a cold engine idling in park. - peeeot 2010-03-02 11:18:24 (23 views)
        
        Hm, something's up for sure. - peeeot 2010-03-02 19:19:44 (18 views)
        
        Re: Hm, something's up for sure. - Hitmanx 2010-03-02 21:35:44 (21 views)

HVAC vacuum pump leakdown rate - peeeot 2010-03-01 12:21:16 (28 views)
- Re: HVAC vacuum pump leakdown rate - rgrimespe 2010-03-01 15:13:19 (30 views)
  - Re: HVAC vacuum pump leakdown rate - peeeot 2010-03-01 23:36:11 (24 views)
    - Re: HVAC vacuum pump leakdown rate - rgrimespe 2010-03-02 10:17:11 (26 views)
      - Re: HVAC vacuum pump leakdown rate - peeeot 2010-03-02 11:11:14 (19 views)
        
        Here are the manuals I have... (url) - demet 2010-03-02 12:23:52 (29 views)
        
        Thanks! - peeeot 2010-03-02 19:22:23 (18 views)
        Re: Here are the manuals I have... - rgrimespe 2010-03-02 18:02:08 (15 views)

1986 e23 735i tach stopped working - airgeorge10 2010-03-02 16:53:18 (22 views)

'84 733i - Oil service reset not working? (url) - datcord 2010-02-28 15:42:36 (38 views)
- If the Service Indicator (SI) won't reset you have dead NiCads - Vern 2010-03-02 01:23:42 (20 views)
  - Re: If the Service Indicator (SI) won't reset you have dead NiCads - datcord 2010-03-02 08:14:19 (16 views)
    - It's only 3 wires to do the remote box. Just watch the polarity. (nt) - Roy In GA 2010-03-02 13:16:18 (15 views)
- David's guide works... but... - jason733i 2010-02-28 21:08:02 (36 views)
  - NOOOOOO!!!! Don't post ramdom crap! (nt) - Vern 2010-03-02 01:11:03 (24 views)
  - Re: David's guide works... but... - 06impreza 2010-02-28 22:55:06 (30 views)
    - Look up the ETM on e38.org/e23. The pin diagram should be there. (nt) - Roy In GA 2010-03-01 02:00:36 (27 views)
      - Re: Look up the ETM on e38.org/e23. The pin diagram should be there. - datcord 2010-03-01 18:08:58 (18 views)

86, e23 735i fuel door button - airgeorge10 2010-03-02 10:50:38 (20 views)
- No button. your fuel door lock my be stuck or not getting power - Vern 2010-03-02 10:59:40 (17 views)
  - Re: No button. your fuel door lock my be stuck or not getting power - airgeorge10 2010-03-02 11:36:47 (17 views)
    - just open the fuel door - no button - jim2sevens 2010-03-02 11:53:16 (18 views)

Brakes won't bleed - blair511 2010-03-01 16:04:36 (29 views)
- I would only bleed with a power bleeder. Some guys will do light pumping, too. - Vern 2010-03-02 11:07:03 (24 views)

No brake fliud is coming out - blair511 2010-02-27 16:49:37 (41 views)
- Re: No brake fliud is coming out - blair511 2010-03-01 19:41:24 (23 views)
  - The hose can collapse - kff 2010-03-02 10:34:11 (20 views)
- My guess: plugged bleeder screws - demet 2010-02-27 17:40:47 (23 views)

84 733i - Idle control unit plug wiring loose - datcord 2010-03-01 20:13:56 (24 views)
- Re: 84 733i - Idle control unit plug wiring loose - datcord 2010-03-01 21:30:35 (23 views)

two problems - dragonbar 2010-02-27 17:18:10 (39 views)
- you need to pull the steering wheel...21mm socket (nt) - Vern 2010-02-27 22:52:01 (33 views)
  - Re: you need to pull the steering wheel...21mm socket - dragonbar 2010-02-27 23:43:41 (25 views)
    - Re: you need to pull the steering wheel...21mm socket - Hitmanx 2010-02-28 00:15:07 (30 views)
      - Re: you need to pull the steering wheel...21mm socket - rgrimespe 2010-03-01 15:17:31 (23 views)

Replacing front struts - Parts needed? - limeyexpat 2010-02-17 19:46:40 (76 views)
- Replaced front struts - some thoughts for others! - limeyexpat 2010-02-28 23:24:56 (27 views)
- Several pints of your favorite beer! (nt) - Vern 2010-02-26 23:36:57 (38 views)
  - Re: Several pints of your favorite beer! - limeyexpat 2010-02-27 09:10:58 (26 views)
    - I'm in North Redondo, not far from the Galleria (nt) - Vern 2010-02-27 13:52:48 (26 views)
      - Re: I'm in North Redondo, not far from the Galleria - limeyexpat 2010-02-27 20:29:49 (24 views)
        
        Is it behind NAPA? (nt) - Vern 2010-02-27 22:50:58 (25 views)
        
        Re: Is it behind NAPA? - limeyexpat 2010-02-27 23:10:43 (32 views)
        
        Okay, Kragen is still there and 7-11 hope to see you in Nov.! (nt) - Vern 2010-02-28 01:43:48 (30 views)
- YAY! Parts arrived today! - limeyexpat 2010-02-26 23:25:17 (26 views)
- Re: Replacing front struts - Parts needed? - Hitmanx 2010-02-18 09:56:27 (49 views)
- Re: Replacing front struts - Parts needed? - limeyexpat 2010-02-18 08:19:38 (51 views)
  - Re: Replacing front struts - Parts needed? - 944s 2010-02-18 09:15:43 (64 views)
    - Re: Replacing front struts - Parts needed? - limeyexpat 2010-02-19 11:36:22 (36 views)

plugged sunroof drain - hardworkingniceguy 2010-02-26 11:39:38 (36 views)

I need a ft. rt. window, scratch free. Anybody???? TIA (nt) - scott 2010-02-24 22:40:04 (42 views)

Starter - goms187 2010-02-19 21:21:13 (70 views)
- Starter pics to compare (pic) - goms187 2010-02-22 23:04:38 (96 views)
- Re: Starter - Hitmanx 2010-02-19 22:13:52 (61 views)
  - haha getting the little one - goms187 2010-02-20 12:15:12 (47 views)
    - Re: haha getting the little one (url) - samspade 2010-02-23 10:12:46 (55 views)
      - Re: haha getting the little one - strobachyzoo 2010-02-23 21:57:57 (41 views)

BBS Front Valance and metal rear valance for Euro Bumpers - jean 2010-02-23 20:08:52 (72 views)
- Re: BBS Front Valance and metal rear valance for Euro Bumpers - jean 2010-02-23 20:29:30 (58 views)

Interesting colors on this 733 (url) - kff 2010-02-21 23:16:47 (113 views)
- Excellent condition it appears. Early 81 with same AC panel as my 735i. (nt) - Roy In GA 2010-02-23 00:19:40 (46 views)
- Re: Interesting colors on this 733 - limeyexpat 2010-02-22 08:18:38 (59 views)

745 for sale - matthewt 2010-02-22 17:39:40 (67 views)

Cooling Fan Clutch - peeeot 2010-02-16 20:43:52 (78 views)
- To me, it sounds like yours it fine- - stevebu 2010-02-17 13:27:13 (54 views)
  - No cooling problems, main symptom is - peeeot 2010-02-17 20:23:59 (55 views)
    - I don't know what the clutch does in the margins of it operation - kff 2010-02-18 09:59:08 (62 views)
      - Mine seems to be inside those two extremes - peeeot 2010-02-21 00:26:30 (49 views)
    - Re: No cooling problems, main symptom is - Hitmanx 2010-02-18 09:54:13 (54 views)
      - That's right, by cold I meant cold startup. - peeeot 2010-02-21 00:23:55 (52 views)
        
        Re: That's right, by cold I meant cold startup. - Hitmanx 2010-02-21 14:49:23 (38 views)
- Re: Cooling Fan Clutch - Hitmanx 2010-02-17 10:52:57 (62 views)
- To use the newer style you'll need... (url) - demet 2010-02-17 08:58:38 (65 views)
  - so - 944s 2010-02-17 12:30:41 (60 views)
    - Re: so - Hitmanx 2010-02-17 15:58:30 (69 views)
      - Very good info, I would add... (pic) - demet 2010-02-17 17:25:32 (87 views)
        
        Re: Very good info, I would add... - 944s 2010-02-18 09:25:22 (50 views)
        
        Re: Very good info, I would add... - Hitmanx 2010-02-18 10:20:17 (60 views)
        
        Re: Very good info, I would add... - 944s 2010-02-18 17:09:52 (49 views)

water in my glovebox - sicstang03 2010-02-17 23:30:44 (56 views)
- Re: water in my glovebox - derrith 2010-02-18 00:55:31 (53 views)
  - Re: water in my glovebox - sicstang03 2010-02-19 10:13:01 (44 views)
    - Can't you get to it if you remove the glove box? - demet 2010-02-19 14:31:52 (51 views)
      - Re: Can't you get to it if you remove the glove box? - sicstang03 2010-02-19 19:07:57 (43 views)
        
        Just Google it... (url) - demet 2010-02-19 23:14:28 (99 views)
        
        Re: Just Google it... - sicstang03 2010-02-20 19:49:48 (33 views)
  - one other likely leak source.... - johnhstein, 85-M6CSi, 85 745i 2010-02-18 09:15:09 (61 views)
    - Re: one other likely leak source.... - sicstang03 2010-02-18 13:28:13 (48 views)

Exhaust system questions - ericcue 2010-02-20 07:11:46 (81 views)
- Re: Exhaust system questions - Hitmanx 2010-02-20 11:52:51 (68 views)
  - Re: Exhaust system questions - ericcue 2010-02-20 14:26:17 (48 views)
    - Re: Exhaust system questions - Hitmanx 2010-02-20 19:28:39 (43 views)
- Re: Exhaust system questions - limeyexpat 2010-02-20 09:56:27 (51 views)

Georgia - Florida Meet - February 27 - donstevens 2010-02-09 09:39:57 (60 views)
- Re: Georgia - Florida Meet - February 27 - donstevens 2010-02-20 18:47:20 (38 views)
- Re: Georgia - Florida Meet - February 27 - oldsurge 2010-02-09 22:03:52 (57 views)

Big Bore Throttle body question TIA - scott 2010-02-12 09:01:23 (77 views)
- With a B35,doyouchange the 059 brain, what other--- - scott 2010-02-17 22:04:14 (50 views)
  - Re: With a B35,doyouchange the 059 brain, what other--- - derrith 2010-02-18 00:34:43 (50 views)
- Re: Big Bore Throttle body question TIA - Hitmanx 2010-02-12 22:27:29 (72 views)
  - What is a B35? (nt) - scott 2010-02-16 21:44:45 (48 views)
    - Re: What is a B35? - Hitmanx 2010-02-17 10:49:49 (50 views)
- Your biggest gains - johnhstein, 85-M6CSi, 85 745i 2010-02-12 12:09:09 (72 views)
  - Thanks John. Much appreciated. (nt) - scott 2010-02-12 19:50:23 (51 views)
    - What is a B35? (nt) - scott 2010-02-16 21:45:14 (35 views)
      - You guys are really great (and smart too!)Thanks (nt) - scott 2010-02-20 18:21:34 (36 views)

anyone interested in selling a rf passanger window? - scott 2010-02-18 21:18:55 (42 views)

Chrome outter drivers side door handle (745) - sicstang03 2010-02-17 22:19:08 (44 views)
- Tell your dealer the part number is ... - samspade 2010-02-17 22:33:54 (50 views)
  - Re: Tell your dealer the part number is ... - sicstang03 2010-02-17 23:28:12 (45 views)
    - Go to RealOEM and enter your VIN (nt) - samspade 2010-02-18 01:57:27 (47 views)
      - Re: Go to RealOEM and enter your VIN - sicstang03 2010-02-18 13:25:04 (42 views)

Anyone need drivers window or regulator? - 06impreza 2010-02-14 18:13:24 (56 views)
- Re: Anyone need drivers window or regulator? - larryhdavis 2010-02-17 21:46:19 (39 views)
- Re: I could use the handle! - sixappeal 2010-02-14 22:46:45 (47 views)

Anyone have a good antenna for sale? - 06impreza 2010-02-17 21:00:00 (41 views)

Set of borbets in SE PA available with tires (url) - kff 2010-02-02 21:12:52 (120 views)
- Do we have any images of these on an e23? - peeeot 2010-02-05 11:27:49 (63 views)
  - I've asked Tammer to see what he can find. (nt) - kff 2010-02-06 01:28:19 (50 views)
- Re: Set of borbets in SE PA available with tires - jdw928 2010-02-03 07:27:04 (67 views)
  - $$$? (nt) - BigBruce 2010-02-03 16:33:37 (58 views)
    - Re: $$$? (pic) - jdw928 2010-02-03 17:29:49 (140 views)
      - Re: $$$? - jdw928 2010-02-17 15:33:42 (43 views)

Running rough after warm up - mikem745 2010-02-13 14:55:56 (73 views)
- Just wondering if you have an O2 sensor installed? - demet 2010-02-17 12:22:49 (43 views)
- Re: Running rough after warm up - Hitmanx 2010-02-14 00:46:25 (54 views)

Euro E23s have rear sway bars? - Hitmanx 2010-02-16 08:39:58 (75 views)
- Re: Euro E23s have rear sway bars? - Hitmanx 2010-02-17 10:55:27 (54 views)
- Re: Euro E23s have rear sway bars? - derrith 2010-02-16 22:52:39 (49 views)
  - Re: Euro E23s have rear sway bars? - ericcue 2010-02-16 23:57:11 (46 views)
  - Re: Euro E23s have rear sway bars? - ericcue 2010-02-16 23:57:11 (43 views)
  - Re: Euro E23s have rear sway bars? - ericcue 2010-02-16 23:57:11 (48 views)
- L7 should have one (nt) - Vern 2010-02-16 19:04:00 (45 views)
- AFAIK only the 745 had 'em - phathome 2010-02-16 15:55:10 (53 views)
- My '85 728i did not have one too. (nt) - samspade 2010-02-16 14:12:01 (39 views)
- Mine did not have one. (nt) - kff 2010-02-16 11:19:17 (36 views)

I need a passanger, front window? TIA (nt) - scott 2010-02-16 21:46:33 (35 views)

velour vs. leather seats - jjacob 2010-02-15 18:36:56 (70 views)
- Re: velour vs. leather seats - Hitmanx 2010-02-16 08:28:42 (49 views)
- Re: velour vs. leather seats - ericcue 2010-02-15 23:30:13 (65 views)
- Hard, very hard to get anything special on BMWs back then - kff 2010-02-15 18:44:07 (51 views)

I have an ETK question. anyone know the answer? (url) - Roy In GA 2010-02-15 11:28:37 (56 views)
- Yours is a couple years newer than mine. 10/03 here. (nt) - kff 2010-02-15 14:01:06 (45 views)

No Start - Cranks but no fire - dzalik1 2010-02-13 19:50:21 (72 views)
- again (from below) ... start simple: is it Fuel or Fire? - johnhstein, 85-M6CSi, 85 745i 2010-02-15 07:59:13 (47 views)
- Re: No Start - Cranks but no fire - Area52 2010-02-14 06:56:34 (44 views)
  - Re: No Start - Cranks but no fire - dzalik1 2010-02-14 12:43:36 (50 views)
- Re: No Start - Cranks but no fire - Hitmanx 2010-02-14 00:50:06 (56 views)
  - Re: No Start - Cranks but no fire - dzalik1 2010-02-14 12:42:51 (45 views)

Bumpers.. (pic) - blowmywhistle 2010-02-14 02:24:55 (101 views)
- I'm assuming your in austrailia? - clemsoncpa 2010-02-14 11:33:26 (66 views)
- Re: Bumpers.. (url) - limeyexpat 2010-02-14 10:48:48 (78 views)

CL Find: 1979 733i - guzman 2010-02-10 00:01:09 (160 views)
- Re: CL Find: 1979 733i - oldsurge 2010-02-11 11:05:12 (77 views)
  - Re: CL Find: 1979 733i (pic) - oldsurge 2010-02-13 11:43:08 (101 views)
- Re: CL Find: 1979 733i - donstevens 2010-02-11 09:07:04 (74 views)
  - Re: CL Find: 1979 733i - donstevens 2010-02-11 09:07:33 (61 views)
- Re: CL Find: 1979 733i - Hitmanx 2010-02-11 01:26:23 (71 views)
- Re: CL Find: 1979 733i - limeyexpat 2010-02-10 08:48:47 (76 views)

L-jet turbo picture from RF - Roy In GA 2010-02-11 20:52:58 (90 views)
- Re: L-jet turbo picture from RF - Hitmanx 2010-02-11 21:58:32 (59 views)
  - Re: L-jet turbo picture from RF - Hitmanx 2010-02-11 22:01:49 (47 views)
- Darn why won't it work on XP. Works fine on 2000 Pro? (nt) - Roy In GA 2010-02-11 20:55:54 (56 views)
  - Works fine on 2000 Pro. (url) - Roy In GA 2010-02-11 21:19:52 (56 views)

Door Handle Replacement Question (pic) (url) - sixappeal 2010-02-11 16:55:27 (97 views)

Help! I need a front passanger window free of.... - scott 2010-02-10 20:55:23 (64 views)

Tire Safety - Are your tires over 4 years old ??? (url) - johnhstein, 85-M6CSi, 85 745i 2010-02-09 12:17:55 (96 views)
- I usually try not to be an alarmist .... - johnhstein, 85-M6CSi, 85 745i 2010-02-10 15:57:41 (61 views)
- This issue was front and center a few years ago when - kff 2010-02-10 13:10:27 (58 views)
- very good point!! - hossomat 2010-02-10 09:34:46 (58 views)

FS: Foha Trunklid Spoiler - derrith 2010-02-10 00:56:28 (95 views)
- Re: FS: Foha Trunklid Spoiler (pic) - kff 2010-02-10 13:05:50 (120 views)
  - When you sell this spoiler, use the proceeds for a camera - kff 2010-02-10 13:07:52 (67 views)

Anyone have an A/C controller? - donstevens 2010-02-06 18:14:03 (69 views)
- Re: Anyone have an A/C controller? - rgrimespe 2010-02-08 16:40:20 (64 views)
  - Re: Anyone have an A/C controller? (url) - kff 2010-02-08 18:44:51 (55 views)
    - Re: Anyone have an A/C controller? - rgrimespe 2010-02-09 10:07:24 (54 views)
    - I got It working - Thanks - donstevens 2010-02-09 09:17:35 (67 views)
      - Did you put a ramp on the 'off' side of the fan wheel? - kff 2010-02-09 10:24:33 (63 views)
        
        Re: Did you put a ramp on the 'off' side of the fan wheel? - donstevens 2010-02-09 19:53:02 (64 views)

US Bumpers - scott 2010-02-06 12:56:49 (80 views)
- I used a kit from ClassicTrimCoat.com and it worked very well. (url) - DavidC 2010-02-07 02:58:03 (76 views)
- Yup (url) - kff 2010-02-06 18:02:10 (98 views)
  - Wow! Thanks Keith! (nt) - scott 2010-02-06 20:49:59 (59 views)

1980 728i for sale: How does this one look to you? - guzman 2010-02-03 02:02:11 (127 views)
- Re: 1980 728i for sale: How does this one look to you? - donstevens 2010-02-06 17:03:21 (68 views)
- Re: 1980 728i for sale: How does this one look to you? - ericcue 2010-02-05 23:12:29 (74 views)
- Re: 1980 728i for sale: How does this one look to you? - oldsurge 2010-02-03 11:11:48 (72 views)
  - Re: 1980 728i for sale: How does this one look to you? - bubbahzanetti 2010-02-06 21:26:35 (62 views)
- Re: 1980 728i for sale: How does this one look to you? - limeyexpat 2010-02-03 08:08:45 (76 views)

OBC II german to english - bubbahzanetti 2010-02-06 20:01:04 (58 views)
- Re: OBC II german to english - bubbahzanetti 2010-02-06 21:18:58 (59 views)

WTB Right front passenger window-----> - scott 2010-02-06 12:52:05 (58 views)

High idle - 733newbie 2010-02-06 08:13:49 (73 views)

Late euro headlights, buckets and grilles. HURRY (url) - kff 2010-02-06 05:47:31 (87 views)

Anyone looking to do a sharknose conversion? - 06impreza 2010-02-02 16:19:03 (78 views)
- Re: Anyone looking to do a sharknose conversion? - oldsurge 2010-02-03 11:12:59 (64 views)
  - i don't believe so... i'll double check though (nt) - 06impreza 2010-02-03 17:14:14 (57 views)
- Re: Anyone looking to do a sharknose conversion? - limeyexpat 2010-02-03 08:10:04 (67 views)
  - Re: Anyone looking to do a sharknose conversion? - 06impreza 2010-02-03 17:16:29 (55 views)

rough idle when warm - elariobordoni 2010-02-02 22:23:44 (67 views)
- several possibilities, but let's start simple.... - johnhstein, 85-M6CSi, 85 745i 2010-02-03 12:07:01 (58 views)
- Re: rough idle when warm - limeyexpat 2010-02-02 22:40:16 (65 views)